Total input
0BTU/hr
| Appliance | Make / model / location | Qty | BTU/hr each | Run (ft) | Future | Total BTU/hr |
|---|
Default ratings are typical starting points. Use the input rating from the appliance data plate or spec sheet — generators at full-load LP input. Run = pipe length from the regulator to that appliance, used for pipe sizing.
Vaporization estimated with diameter × length × liquid-level factor at 0°F — conservative for Florida. Size underground tanks against their own manufacturer data where available. Pipe sizing per NFPA 54 / Florida Fuel Gas Code tables for the chosen system pressure.
Required capacity = connected load on that regulator. Pick a model whose rated capacity meets or exceeds it. Use underground-rated regulators with vent protection under the dome on buried tanks.
| Section | Load BTU/hr | CFH | Length used | Material | Pipe size | Size carries |
|---|